Before using a cultivator, you must read the msds provided by the manufacturer. In addition to the specific safety rules that you will find in the manual, there are some measures that are valid for any model.
Before starting to use your cultivator...
Familiarize yourself with the machine in all its parts and all its controls, so you can act promptly in case of need.
Check that no component of the machine is damaged or too worn out or dirty.
Inspect the area where you are going to operate and remove all objects that may be thrown from the cultivator in operation or otherwise damage the machine (stones, logs, etc.)
Make sure that the environment in which it operates is sufficiently ventilated, to avoid harmful emissions. For this reason, always start the cultivator in the open.
Always wear anti-slip footwear and long trousers when working.
During use of the cultivator...
Do not use the cultivator if you are nearby people or pets. The work area should be cleared within a radius of 20 metres.
Stop the cultivator immediately in the event of a collision with an object, block, problems with the clutch, abnormal vibrations. In these cases, leave to cool the cultivator and disconnect the spark plug cable to be able to ispezionarne the parts before continuing to work.
Do not fill the gasoline when the engine is running or still hot. Do not open either the tank cap unless the machine is switched off.
In the case of land in slope, working transversally in order to avoid that the machine could reach him. Never move the cultivator in a climb or in a descent.
Always stops the engine every time you step away even briefly from the machinery.
The maintenance of the cultivator
Always use accessories and original parts approved by the manufacturer. Use of unauthorized accessories makes you lose the warranty in case of failure but it can also be very dangerous: it is better to spend a little more but go on the safe side.
Check periodically that the bolts are tight and that the components of the cultivator are not worn or damaged. In the case of worn components, change the specific block according to the instructions of the manufacturer.
Keep the engine, the fuel tank and the exhaust pipe clean so as to avoid danger of fire. Be careful that there are no sources of heat in the place where you go to store the machinery.
Before any control or maintenance operation, always disconnect the spark plug cable and before putting the cultivator on the inside of a closed place, let it cool down completely.
 | Do you want to buy a cultivator? Click here! You are a professional and want to add some of your own advice? Leave a comment below!
|
