Bostik poly max high tack - gr.300 cartridge - transparent
Assembly glue and sealant universal with outstanding initial tack and the big end seal. Mounting adhesive and sealant universal quality based on a technology that is SMP only, with high initial tack and high speed for achieving the final strength of the bonding
( €15.02 NET - VAT excluded )
Guarantees
- Warranty 2 years
- Satisfied repaid 6 months
- Quick assistance
Delivery
- Express courier
- UK: 3/5 days
- Europe: 3/5 days
Payment methods
- Paypal
- Credit card
- Bank transfer
- Amazon Pay
Bostik poly max high tack - gr.300 cartridge - transparent
Assembly glue and sealant universal with outstanding initial tack and the big end seal.
Mounting adhesive and sealant universal quality based on a technology that is SMP only, with high initial tack and high speed for achieving the final strength of the bonding. For bonding, mounting and sealing of almost all materials (from construction) on almost all surfaces (both smooth and porous is non-porous). The initial setting is very high. Super-fast to. Permanent elasticity.
FIELD APPLICATION
Bonding: e.g. glass, stone, natural stone, concrete, stucco, many plastics, wood, plywood, trespa, iron, aluminium, zinc, steel, stainless steel and other metals, ceramic tiles, cork and mirrors. Mounting: e.g. mouldings, beadings, of wood, head boards, window sills, thresholds, bands, slabs, insulation material, gypsum, ornaments of styrofoam and trim. Sealing: among other applications for internal frames (plastic), stairs, mouldings, window sills, thresholds, panels and plaster. Also suitable for sealing cracks in walls and ceilings. Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen.
PROPERTY
High speed for achieving the final strength of bonding very High final strength of the bonded permanent Elasticity Suitable for indoor and outdoor can be painted over (test in advance) Good filling properties Resistant to temperatures between -40°C and +100°C Resistant to water, UV and weather resistant Glue 100% (shrink-resistant) Adheres to surfaces slightly moist, Without solvents, resistant to mould and mildew Excellent adhesion without primer acid-Free, odorless, With nozzle, foldable.
METHOD OF USE
Glueing and fitting: cut the nozzle to a diameter of at least 0.5 cm. Sealing: cut off nozzle transversely according to the width of the joint. Gluing and mounting apply the glue in strips or in such a way point (about 10-40 cm) and always in the corners and along the edges of the plates. Apply the material within 10 minutes at the desired position and press firmly, or fasten gently with a rubber hammer. Tighten or fasten the heavy-duty material for 4 hours, as needed. Fixing by hand is completed after 30 minutes (the structure is now strong enough to be transported or subjected to a light load); the maximum final strength of the bonding after about 4 hours, depending on the gluing surface, and environmental conditions. Sealing: apply evenly the glue down to the base of the joint and smooth out within 10 minutes with the help of a putty knife damp (soapy water without lemon) or a finger. Smooth the vertical joints from bottom to top. Full cure after several days (depending on the thickness of the layer). In the case of overcoating with paint alkyd is possible for the paint to dry more slowly. Stains/Residue: To clean tools and remove residues of glue is wet, use turpentine. The glue residue will dry, can only be removed mechanically.
Approved by TÜV on:
Cut resistance
Tensile strength
Elasticity
Adhesion to various materials
Bostik Poly Max High Tack Express, and the assembly glue 3-in-1 paste, assembles and seals all materials in all conditions, even under water.
Watch the video: our expert on adhesives and sealants to show us the extraordinary performances of Poly Max High Tack Express, and gamma Poly max!